Company FAQ's Contact Product Catalog
   
Gearbox System
MI-502
SB-400-45

 

 
FEATURES

 

The MI-502 gearbox system is required to be used with ME-420; ME-425, and ME-430 400HZ motors. They can also be used as supplementary gearboxes for your existing motors to speed up or slow down your diamond cutting tools.

These gearboxes all use AN-2001 flanges for both input and output and ⅝ spline couplings for both input and output drives. This means the gearboxes can be mixed and matched to get almost any RPM you require, either lower or higher than previously possible.

For example: a wall saw gearbox using a 3,000 RPM motor has output speed of 1,000 RPM. For sawing special jobs with large blades you could insert an MI-502-2 with a 1.5:1 ratio that would produce a 668 RPM output speed or the MI-502-3 with a 2:1 ratio which would produce a 500 RPM output speed, or the MI-502-4 with a 3:1 ration would produce 333 RPM output speed or the MI-502-5 with 4:1 ratio would produce 250 RPM output speed.

 

SPECIFICATIONS:

    • Size: 4½” X 7” X 5”

    • Weight: 8 Lbs

    • Size: 44" H X 29" W X 43" L

    • Ratios:

      • MI-502-2 1.50:1
      • MI-502-3 2.00:1
      • MI-502-4 3.00:1
      • MI-502-5 4.00:1
    • ⅝ Spline Drive Both Input & Output.



Copyright © 2008 400 Hertz Engineering. All rights reserved.   |  Privacy Policy