Company FAQ's Contact Product Catalog
   
  Available Motors
  Category Product Name Product Description

ME-C500-7.5WC

ME-C500-7.5WC

Motors

7.5HP / 400HZ / Water Cooled Motor

The ME-C500-7.5WC is a totally sealed motor made especially for use with the CD-C500 Cardi Gearbox. It is water cooled, 12, 000 RPM and very reliable. It's high torque and cool running make it very desirable for production drilling.

specifications

ME-C500-7.5AC

ME-C500-7.5AC

Motors

7.5 HP / 400HZ / Air Cooled Motor

The ME-C500-7.5AC is an air cooled, totally sealed motor designed for use with a CD-C500 Cardi Gearbox. It is a good choice for applications where drilling is required.

specifications

ME-400-8PWC

ME-400-8PWC

Motors

7.5 HP / 6,000 PRM / Water Cooled Motor

The ME-400-8PWC is a 6,000 RPM motor made to bolt directly to a CD-C800 or a CD-C1000 motor adaptor. This motor will give proper RPM and high torque for drilling deep holes and is very well liked for this application.

specifications

ME-400-12.5WC

ME-400-12.5WC

Motors

12.5 HP / 400HZ / Water Cooled Motor

The ME-400-12.5WC is a lightweight 12.5 HP water cooled 400 HZ modular style motor specifically designed to run on a 10 KW inverters and Generators.

It uses with the MI-502 (Step Up-Step Down) gear box system which allows 8,000 RPM, 6,000 RPM, 4,000 RPM and 3,000 RPM output speeds.

specifications

ME-400-20WC

ME-400-20WC

Motors

20 HP / 400 HZ / Water Cooled Motor

The ME-400-20WC is a lightweight 20 HP water cooled 400 HZ modular style motor built for maximum reliability. It uses the MI-502 gearbox system which allows 8,000 RPM, 6,000 RPM, 4,000 RPM and 3,000 RPM output speeds.

specifications

ME-400-40AC

ME-400-40AC

Motors

40 HP / 400 HZ / Air Cooled Motor

The ME-400-40AC is a big, strong, lightweight, air-cooled electric motor that is an excellent choice for high production flat sawing. It is a 12,000 RPM motor with a heavy duty gearbox and 1⅜” output shaft.

This motor can easily replace gasoline or diesel engines on your extra flat saw with its 2,600 RPM output speed.

specifications

ME-410 A

ME-410 A

Motors 7.5 HP, 2,400 RPM / Air Cooled Motor

The ME-410A is a totally enclosed, air cooled, 2,400 RPM, high efficiency motor. It is usually used on the FS-400 Electric Flat Saw Frame or the FS-900 Crete Mower.

specifications

ME-413A

ME-413A

Motors 15 HP, 2,000 RPM / Water Cooled Motor

The ME-413A is the newest and most modern 400 HZ motor design available. It is heavy duty, water cooled, totally enclosed motor designed for the toughest use. With its 2, 000 RPM output speed, it is primarily used as a Wall Saw Motor when slower blade speed is desired.

The gearbox uses a carbon face seal and extra wide, heavy pitch gear teeth for maximum reliability. It has the same output torque at its high speed cousin the ME-414A. It has an AN-2001 Adaptor Flange and a ⅜” spline coupler for maximum application flexibility.

specifications

ME-414A

ME-414A

Motors 20 HP, 3,000 RPM / Water Cooled Motor

The ME-414A is the most modern high horsepower 400 HZ motor design available. It is a water cooled, continuous duty motor that is totally enclosed and built to stand the toughest use.

The gearbox uses a new design, small diameter, carbon face seal and extra wide heavy pitch gear teeth for maximum reliability at its 3,000 RPM output speed. This gearbox is designed for easy maintenance using a quick change, slip-on, pinion gear.

The ME-414A has an AN-2001 Adaptor Flange and a 5/8” spline coupler for maximum application flexibility

specifications

ME-415

ME-415

Motors 10.7 HP, 2,400 RPM / Air Cooled Motor

The ME-415 is an open, air cooled motor that is the lightest output shaft design 400 HZ unit available. It is very economical to use on the FS-400 Electric Flat Saw Frame as it does not require an adaptor for the belt drive. It is an excellent motor for use on the FS-400 Flat Saw Frame for Core Drill or Wall Saw trucks.

The ME-415 has an excellent starting characteristics and can be started and run at slightly reduced power with a 7.5KW generator.

specifications

ME-416

ME-416

Motors 1.5 HP, 1,500 RPM, 400 HZ Motor

The ME-416 is a low RPM output, totally enclosed motor that is ideal to drive gear type water pumps for truck water pressure. These units are very, very reliable and have the ability to pump 70# water pressure day after day for years without maintenance.

The ME-416 has an AN-2001 mounting flange with a 5/8” spline coupler.

specifications

ME-419

ME-419

Motors 40 HP, 12,000 RPM / Air Cooled Motor

The ME-419 is a 40HP, 12,000 RPM motor that was designed for the WS-300 Wall Sawing System and the CD-200 and CD-300 Drilling System.

The AN-2001 Mounting pad allows the use of the MI-502, 503, and 556 "add-on" gearboxes for output speeds of 8,000, 6,000, 4,000, 3,000, or 2,000 RPM. The addition of these gearboxes allows them to be used with any standard AN-2001 Flange machine.

specifications

ME-419/6

ME-419/6

Motors 25 HP, 8,000 RPM / Air Cooled Motor

The ME-419/6 Air Cooled Motor is designed for the greatest efficiency and highest horsepower of any motor in its class.

It is a 25 HP, 8, 000 PRM motor designed originally for the WS-300 Wall Sawing System.

The addition of a supplementary gearbox (MI-502) allows this motor to be used with any standard AN-2001 Flange machine.

specifications

ME-420SC

ME-420SC

Motors 4.5 HP, 24,000 RPM / Air Cooled Motor

The ME-420SC is a 24,000 RPM, 4.5 horsepower 400 HZ Electric Motor designed for use on the CD-510A and CD-510N 8-speed Core Drill gearboxes. It is a "special" motor for small hole drilling.

An ME-420SC Motor on the CD-510A gearbox gives output speeds from 300 RPM to 3,200 RPM. CD-510N output speeds are slightly lower. All output speeds are listed on CD-510A/CD-510N catalog sheets.

specifications

ME-421SC

ME-0421SC

Motors 4,5 HP, 12,000 RPM / Air Cooled Motor

The ME-421SC is a 12,00 RPM, 4.5 horsepower 400 Hz Electric Motor designed for use on the CD-510A and CD-510N 8-speed Core Drill gearboxes.

An ME-412SC Motor on the CD-510A gearbox gives output speeds from 150 RPM to 1,600 RPM. CD-510N output speeds are slightly lower. All output speeds are listed on CD-510A and CD-510N catalog sheets.

* A special slip clutch protects the mating gearbox.

specifications

ME-421ASC

ME-421ASC

Motors 7.5 HP, 12,000 RPM / Air Cooled Motor

The ME-421ASC is a 12,000 RPM, 7.5 horsepower 400Hz Electric Motor designed for use on the CD-510A and CD-510N 8-speed Core Drill gearboxes. It is an extremely reliable motor for heavy duty drilling.

An ME-420ASC Motor on the CD-510A gear box gives output speeds from 150 RPM to 1,600 RPM. CD-510N output speeds are slightly lower. All output speeds are listed on CD-510A and CD-510N catalog sheets.

A cast aluminum cover bolts over the output side of this motor to protect the gear and bearing from dirt when it is not mounted on the gearbox.

* A special slip clutch protects the mating gearbox.

 

specifications

ME-422SC

ME-422SC

Motors 4.5 HP, 6,000 RPM / Air Cooled Motor

The ME-422SC is a high torque, 6,000 RPM, 4.5 HP, 400 Hz Electric Motor designed for use on the CD-510A and CD-510N 8-speed Core Drill gearboxes. It is usually used for high torque, low speed drilling of large diameter holes. It has a Quick-Disconnect-Plate for fast installation or removal.

An ME-422SC Motor on the CD-510A gear box gives output speeds from 75 RPM to 800 RPM. CD-510N output speeds are slightly lower. All output speeds are listed on CD-510A and CD-510N catalog sheets.

A cast aluminum cover bolts over the output side of this motor to protect the gear and bearing from dirt when it is not mounted on the gearbox.

* A special slip clutch protects the mating gearbox.

specifications

ME-425

ME-425

Motors 20 HP, 8,000 RPM / Water Cooled Motor

The ME-425 Water Cooled Motor has been designed for the greatest efficiency and highest horsepower of any motor in its class.

It was originally developed for the WS-300 Wall sawing System, but its universal AN-2001 mounting flange and the MI-502, 503 and 556 series add-on supplementary gearboxes allow this motor to be used with any standard An-2001 flange machine.

This unit requires the use of a separate gearbox (MI-502) to get the proper RPM to match your concrete cutting equipment

 

specifications

ME-426SC

ME-426SC

Motors 10 HP, 12,000 RPM Motor

The ME-426SC is a 12,000 RPM, 10 HP, 400 Hz Electric Motor designed for use on the CD-510A and CD-510N 8-speed Core Drill gearboxes.

An ME-426SC Motor on the CD-510A gear box gives output speeds from 150 RPM to 1,600 RPM. CD-510N output speeds are slightly lower. All output speeds are listed on CD-510A and CD-510N catalog sheets.

A cast aluminum cover bolts over the output side of this motor to protect the gear and bearing from dirt when it is not mounted on the gearbox.

* A special slip clutch protects the mating gearbox.

 

specifications

ME-440

ME-440

Motors 30 HP, 12, 000 RPM Motor

The ME-440 Water Cooled Motor has been designed for the greatest efficiency and highest horsepower of any motor in its class.

It was originally developed for the WS-300 Wall sawing System, but its universal AN-2001 mounting flange and the MI-502, 503 and 556 series add-on supplementary gearboxes allow this motor to be used with any standard An-2001 flange machine.

This unit requires the use of a separate gearbox (MI-502) to get the proper RPM to match your concrete cutting equipment.

 

specifications

ME-450

ME-450

Motors 40 HP, Continuous Duty / Water Cooled Motor

The ME-450 is a large, heavy duty, 4 pole (12,000 RPM) 400Hz motor that is designed to be used for heavy applications such as flat sawing on bridge decks and wall sawing up to 30 inches deep from side to side.

This unit is totally enclosed, water cooled and uses a special bolt-on gearbox to reduce its speed to a more useful RPM.

The ME-450 is "down rated" to only 40 HP to keep the rotor temperatures down on high load, long time period applications. The 40 HP rating is developed at 120 AMP's of running load.

This motor is capable of 50-60 HP for short periods of time.

specifications

ME-400-200-416

ME-400-200-416

Motors 200 HP, Heavy Duty / Air Cooled Motor

The ME-400-416 is a 150 KW (200HP) 400 KZ electric motor designed for heavy duty applications such as electric automobiles.

This unit requires a generator or invertors of 150 Kilowatts of capacity or more to run at full power.

specifications