Company FAQ's Contact Product Catalog
   
   
  Category Product Name Product Description

HS-414

HS-414

Hand Saw

14 Inch, 400 HZ Hand Saw

The HS-414 hand saw is a heavy duty, lightweight hand saw that is considered the standard of the industry by operators who use it. It is hermetically sealed, has 7½ horsepower, water cooled motor and can saw up to 5⅜” deep. The 14 inch diamond blade rotates at 2600 RPM for optimum blade performance and the saw features a one inch round arbor and pin drive to permit the use of any standard diamond blade. It has an internal slip clutch built in for protection.

The primary use for the HS-414 is production sawing of concrete between 2” and 5⅜” deep. It is often used as a substitute for special slab sawing or wall sawing jobs where set-up is difficult or access to the job is limited. The HS414 is standard equipment for wall saw and core drill trucks for miscellaneous sawing.

This saw is capable of 100% power output hundreds of feet from its power source. It is one of the most versatile hand tools developed for the concrete cutting industry.

 

specifications

HS-414

HS-420

Hand Saw 20 Inch, 400 HZ Hand Saw

The HS-420 hand saw is a heavy duty, medium RPM Hand Saw designed to cut completely through 8 inch thick walls. It is powered by a sealed 7 1/2 horsepower, water cooled, 400 HZ motor. The motor has a thermal overload shut-off for protection and a slip clutch for maximum gear life and operator safety. The saw has a one inch round arbor to permit the use of any standard diamond blade. It has an internal slip clutch built in for protection.

The primary use for the HS-420 is production hand sawing of concrete between 5” and 8⅜” deep. It is often used as a substitute for special slab sawing where set-up is difficult or access to the job is limited.

This saw is capable of 100% rated power hundreds of feet from its power source, and is one of the most versatile hand tools developed for the concrete cutting industry.

specifications